SENYAFEI

In daily life, everyone will encounter the matter of home decoration to some extent. So after the decoration is completed, how should it be inspected and what details or issues should be noted?

01 Appearance - It should be beautiful

The surface paint film of wooden doors and Windows should be smooth, bright, free of sagging, bubbles, wrinkles and other quality defects. The wood used for door casings should be in harmony with the wood and color of the door and window sashes. When choosing aluminum alloy doors and Windows with broken bridge technology, it is important to pay attention to whether the surface color matches the overall color of the home decoration.

02 Door and window sashes - Square

The sashes of doors and Windows should be square and upright, without warping or deformation. They should just fit into the frame and fit well with it. If the gap between the door and window sash and the door frame is large, it is mainly due to inaccurate planing during installation or the door and window frame not being perpendicular to the ground. A pad should be placed inside the frame plate to straighten it.

03 Hinges - Precision

The position of the hinges should be precise and they should be installed firmly. If the hinges are not aligned properly, it will cause the door and window sashes to not match the frame sleeves, and the opening and closing of the doors and Windows will not be smooth. You can first unscrew one screw from each hinge, then adjust the fit between the door and window sash and the frame. After the adjustment and repair are correct, tighten it again.

04 Door and window locks - Smooth opening and closing

The lock of the door and window should fit the position of the door leaf and the door frame. If the lock is not installed properly, it will cause the door leaf to open and close unsmoothly. The lock tongue plate can be removed, the tongue groove repaired and adjusted to the correct position. In addition, the opening method of the door should meet the requirements.

05 Door and window casings - Base material

When the basic materials inside the door and window casings are made of blockboard or density board, the base board should be fixed to the keel of the window frame layer and then nailed with strips. The door casing should be made into a frame of wood, planed flat, straightened, assembled into shape and installed on the wall. You can check it by tapping the side panels of the door and window casings with your hand. If a hollow sound is heard, it indicates that there is no base material.

In addition, the problem of door and window deformation is relatively simple and easy to inspect. For instance, dents, damages, and scratches on the door and window frames are all caused by inadequate protection during installation. Attention should also be paid during the acceptance.